VaraaAi
Academy

HairStep-by-step practice·Lesson 46/64·4:45

Cutting a fade: step-by-step practice

A mid skin fade step by step: preparation and a fresh blade, consultation and showing the height on the customer's head, the guideline all the way round, the area below it, blending each band with the lever and half guards, erasing leftover lines, the skin part and the outline, checking both sides and the back in good light, connecting to the top, finishing, notes and clean-up.

Speed

The narration is in Vietnamese (subtitles: CC button on the player). The steps below are in English.

Safety first

The fade height is what you agree with the customer, not a standard. Guard numbers and the lever direction differ by brand. Razors use single-use blades only, a fresh one for every customer, disposed of in a sharps box; clippers, guards, combs and shavers are cleaned and disinfected after every customer as the product instructs (lesson “Tools after every customer”). Wounds or inflammation on the scalp: no close shave (lesson “When not to treat a customer”). Rules differ by country.

These videos are study aids. They don't replace supervised hands-on training and they are not a professional licence. Always follow the product manufacturer's instructions and the rules where you work.

Key points to remember

  1. 1

    Wash your hands; clipper, guards and combs cleaned and disinfected; a fresh blade in the razor. A single-use neck strip, then the cape.

  2. 2

    Consult: low, mid or high, skin or not; point at the customer's head in the mirror where the fade will start. Feel the head shape, look for flat spots, scars and whorls. A first-timer: suggest lower.

  3. 3

    Guideline: clean dry hair combed down; guard flat at the hairline, up against the growth, flicking the wrist out at the agreed height; all the way round at the same height. A flat back: lower the guideline there a little.

  4. 4

    Below the guideline: two or three bands; the lowest with the lever closed or a shorter guard, a shorter stroke, also flicking out. Go very gently at the hairline around the ears and nape.

  5. 5

    Blend from the bottom up: at each line use the in-between length (lever half open, then more; or a half guard), right on the line, short light scoops. Brush off loose hair between passes so you can see the lines.

  6. 6

    Erase remaining lines under the light, only on that spot — don't push the whole fade up. Nape whorls: several directions. The back: walk behind the customer and look at eye level.

  7. 7

    The skin part: stretch the skin, use a foil shaver; a razor only with a fresh blade, with the grain, one pass. Redness or stinging: stop. Then outline ears, sideburns and nape as in Men's haircut basics.

  8. 8

    Check in good light: both sides at the same height, level sideburns; look from left, right, eye level and behind. One side higher: the only fix is raising the lower side — take care from the guideline on.

  9. 9

    Connect to the top: cut the top from a guideline, then scissor- or clipper-over-comb until no ridge is felt. The shorter the top, the smoother the connection must be.

  10. 10

    Finish: brush off loose hair; a fragrance-free soothing cream for sensitive skin if the customer agrees; style and show how at home; the hand mirror. Record height, guards and lever; book the next visit (many customers 2–3 weeks). Clean, disinfect, oil; the blade into the sharps box.

Tips

  • The flick-out comes from the wrist, not the whole arm — a relaxed wrist keeps the stopping point from leaving a line.
  • In VaraaAi, note “mid fade, guards, lever” in the customer notes; next time anyone can repeat it exactly.

Quick quiz

3 questions, 20 points for each right answer.

Question 1/3

When setting the guideline, what do you do at the agreed height?