NailsStep-by-step practice·Lesson 22/68·4:34
French and ombré: step by step
A classic French with a liner brush: prep and base as in the gel polish lesson, a thin pink base, choosing the smile line, painting from one corner to the centre and mirroring from the other, cleaning the line with a barely damp brush before curing, fixing an uneven nail, top coat and checking all ten nails. Then ombré: pink base, white only on the tip, blending upwards with a brush or sponge, curing, another thin layer if needed.
The narration is in Vietnamese (subtitles: CC button on the player). The steps below are in English.
Safety first
Curing times and product use always follow the manufacturer's instructions. Uncured gel never touches the skin. Rules on nail products differ by country. This lesson is a training aid, not a licence.
These videos are study aids. They don't replace supervised hands-on training and they are not a professional licence. Always follow the product manufacturer's instructions and the rules where you work.
Key points to remember
- 1
Dry prep as in the gel polish lesson: push back, remove cuticle tissue from the plate, lightly remove the shine, clean off oil. Shape the nails first, because the smile line has to suit the shape.
- 2
A thin base coat, cap the free edge, cure; then one or two thin sheer pink coats, each cured. A slightly more opaque base hides an uneven natural free edge.
- 3
Look at all ten nails before choosing the smile line: set the depth by the shortest or most uneven nail; picture three points, two corners of equal depth and the shallowest point in the centre.
- 4
A little white gel on the liner brush. Start at one corner and follow the curve to the centre; then from the other corner, at the same depth, to the centre so the halves meet. Turn the customer's finger, not your wrist.
- 5
Fill in to the edge and lightly cap the free edge. Keep the white thin; if it isn't white enough, that's for the next layer.
- 6
Before curing, clean the smile line with a small flat brush that is only barely damp with cleanser, gliding along the inner edge of the white; wipe the brush every time. A wet brush makes the white bleed.
- 7
Fix an uneven tip before curing: wipe that nail's white off and paint it again. Paint a few nails, then cure, and keep the customer's hand away from the lamp while painting.
- 8
Cure for the full time; if it needs to be whiter, add one more thin layer along the same line. Top coat over everything, cap the edge, cure, wipe the sticky layer if there is one. Then check all ten nails from above and fix any uneven one right away.
- 9
Ombré: a thin pink or nude base, fully cured. White (often milky white) only on about the front third of the nail, thin, never up near the cuticle.
- 10
Blend with a clean, almost dry flat brush in very short, light strokes towards the cuticle, or dab with a sponge (one per customer). One nail at a time, cure as soon as it's blended; add thin layers if needed, usually two to three. A band or streaks means the layer is too thick or not blended enough.
Tips
- Picture three points before the brush touches the nail: two corners of equal depth and the shallowest point in the centre. Get the three points right and the smile line almost evens itself.
- In VaraaAi, note the French style, depth and base shade in the customer record, so next time you can repeat it exactly.
Quick quiz
3 questions, 20 points for each right answer.
In what order do you paint the white of a French?